CONTACT US
+86-755-27502790
- Granbo Technology Industrial Shenzhen Co., Ltd.
Address: Room 401, Building 2, Xinweirun High-Tech Park, 162 Shajiang Road, Xitou, Songgang, Bao’an, Shenzhen, Guangdong, China
Tel:+86-755-27502790
Contacts: Felix Su
Mobile: +86-18938668559
(skype/whatapp/wechat)
E-mail: felix@granbo.co
SUPPORT
Current Location：Home > Support > Support
Daily Maintenance and Maintenance Specification for Ultrasound Cleaner
Daily Maintenance and Maintenance Specification for Ultrasound Cleaner:
Daily maintenance
1. Power supply: Using the power supply and power cord that conform to the equipment specifications, the user's power supply circuit must be equipped with an air switch dedicated to the cleaner to cut the power supply of the cleaner when needed.
2. Grounding Wire: The cleaning machine body and generator will be equipped with special grounding wire on its power supply lead, which is clearly distinguished from other wires. Because the equipment is liable to leakage due to contact with water and corrosive (swelling) liquid level, please connect the grounding wire according to safety requirements.
3. The equipment uses non-flammable detergent, and should not use flammable and explosive substances as detergent. When the equipment is used in situations where it is necessary to keep away from flammable and explosive substances, and when the users need to use certain substances under special circumstances, they must consult our department to confirm safety and take appropriate safety protection measures.
4. The equipment will be irreversibly damaged if there is no liquid or insufficient liquid level in the cleaning tank. When using, it is necessary to ensure that sufficient liquid is injected into the tank. Otherwise, the relevant electric heaters, pumps and ultrasonic vibrators may be damaged and may lead to fire and personal injury.
5. Take care not to splash water into the electric control box and related electrical components, and keep away from steam, corrosive gases, dust, etc.
6. When equipment is abnormal, please contact us in time or check by experienced professional electrician after power supply is stopped.
7. Workpieces to be cleaned should be mounted and hung with a washing basket or hanger with a supporting foot and washed in a tank. It is forbidden to place the workpiece directly at the bottom of the tank for cleaning, otherwise it may cause damage to the workpiece and the bottom of the cylinder.
8. When the equipment is working, there may be high temperature, high pressure, electrified terminal surface of electrical components, movement of transmission mechanism, pressure burst and other factors that may cause personal injury. Do not open the casing when working, so as not to work under unprotected conditions.
9. When the equipment is not in use for a long time, please release the detergent and protect the inner groove and surface with film after drying, so as to prevent the corrosion aging of the equipment from accelerating.
10. Maintaining ventilation, dryness and cleanliness in the workplace of equipment is conducive to the long-term and efficient operation of equipment and the optimization of working environment conditions.
11. When the cleaning liquid is too dirty, it should be handled in time. The dirt in the cleaning tank and the storage tank should be cleaned regularly to keep the cleaning tank and its appearance clean, so as to improve the durability of the cleaning tank.
Maintenance Code
1: The power supply is 380V AC. (Three-phase four-wire)
2: First connect the signal line between the ultrasonic power supply and the cleaning tank. (Dial-to-Dial Connection)
3: Add liquid into the cleaning tank, the height is about 300 mm. When the liquid in the tank reaches half of the height of the tank, the optimum temperature is 40-55 degrees.
4: The workpiece to be cleaned is put into the cleaning tank, and the workpiece should not touch the bottom directly. Do not impact the side wall of the cleaning tank.
5: Set the working time of the ultrasound (attention time can not be zero), press the start button of the ultrasound, and the ultrasound starts to work.
6: The cleaning time is determined by the degree of oil contamination of the workpiece.
7: Close the filter outlet valve when the circulating filter is closed.
8: Clean the sludge at the bottom of the cleaning tank regularly.
9: If the equipment is not used for a long period of time (7 days) in summer, the liquid in the cleaning tank should be discharged cleanly. In winter, it should be ensured that the tank does not freeze.
10: If the dust in the workshop is large, compressed air should be used monthly to clean up the dust in the distribution cabinet.
Daily maintenance
1. Power supply: Using the power supply and power cord that conform to the equipment specifications, the user's power supply circuit must be equipped with an air switch dedicated to the cleaner to cut the power supply of the cleaner when needed.
2. Grounding Wire: The cleaning machine body and generator will be equipped with special grounding wire on its power supply lead, which is clearly distinguished from other wires. Because the equipment is liable to leakage due to contact with water and corrosive (swelling) liquid level, please connect the grounding wire according to safety requirements.
3. The equipment uses non-flammable detergent, and should not use flammable and explosive substances as detergent. When the equipment is used in situations where it is necessary to keep away from flammable and explosive substances, and when the users need to use certain substances under special circumstances, they must consult our department to confirm safety and take appropriate safety protection measures.
4. The equipment will be irreversibly damaged if there is no liquid or insufficient liquid level in the cleaning tank. When using, it is necessary to ensure that sufficient liquid is injected into the tank. Otherwise, the relevant electric heaters, pumps and ultrasonic vibrators may be damaged and may lead to fire and personal injury.
5. Take care not to splash water into the electric control box and related electrical components, and keep away from steam, corrosive gases, dust, etc.
6. When equipment is abnormal, please contact us in time or check by experienced professional electrician after power supply is stopped.
7. Workpieces to be cleaned should be mounted and hung with a washing basket or hanger with a supporting foot and washed in a tank. It is forbidden to place the workpiece directly at the bottom of the tank for cleaning, otherwise it may cause damage to the workpiece and the bottom of the cylinder.
8. When the equipment is working, there may be high temperature, high pressure, electrified terminal surface of electrical components, movement of transmission mechanism, pressure burst and other factors that may cause personal injury. Do not open the casing when working, so as not to work under unprotected conditions.
9. When the equipment is not in use for a long time, please release the detergent and protect the inner groove and surface with film after drying, so as to prevent the corrosion aging of the equipment from accelerating.
10. Maintaining ventilation, dryness and cleanliness in the workplace of equipment is conducive to the long-term and efficient operation of equipment and the optimization of working environment conditions.
11. When the cleaning liquid is too dirty, it should be handled in time. The dirt in the cleaning tank and the storage tank should be cleaned regularly to keep the cleaning tank and its appearance clean, so as to improve the durability of the cleaning tank.
Maintenance Code
1: The power supply is 380V AC. (Three-phase four-wire)
2: First connect the signal line between the ultrasonic power supply and the cleaning tank. (Dial-to-Dial Connection)
3: Add liquid into the cleaning tank, the height is about 300 mm. When the liquid in the tank reaches half of the height of the tank, the optimum temperature is 40-55 degrees.
4: The workpiece to be cleaned is put into the cleaning tank, and the workpiece should not touch the bottom directly. Do not impact the side wall of the cleaning tank.
5: Set the working time of the ultrasound (attention time can not be zero), press the start button of the ultrasound, and the ultrasound starts to work.
6: The cleaning time is determined by the degree of oil contamination of the workpiece.
7: Close the filter outlet valve when the circulating filter is closed.
8: Clean the sludge at the bottom of the cleaning tank regularly.
9: If the equipment is not used for a long period of time (7 days) in summer, the liquid in the cleaning tank should be discharged cleanly. In winter, it should be ensured that the tank does not freeze.
10: If the dust in the workshop is large, compressed air should be used monthly to clean up the dust in the distribution cabinet.